Concorde V6-3.5L VIN V (2003)
Turn Signal Lamp: Service and Repair
Park/Turn Signal Lamp Replacement
REMOVAL
CONCORDE
1. Remove headlamp housing from vehicle.
2. Disconnect wire connector from back of lamp socket(s).
3. Rotate socket and pull lamp socket from headlamp housing.
4. Remove bulb from lamp socket.
INSTALLATION
CONCORDE
1. Push bulb into lamp socket.
2. Place lamp socket into headlamp housing and rotate to the lock position.
3. Connect wire connector to lamp socket(s).
4. Verify headlamp operation.
5. Install headlamp housing.
6. Verify headlamp operation and alignment.