Concorde V6-3.5L VIN V (2003)
9. Remove the jounce bumper cup and jounce bumper from the strut shaft by pulling each straight up and off the strut shaft. If the jounce bumper cup
is not present, check inside the dust shield. It may have stayed inside the dust shield.
10. Remove the lower spring isolator from the lower spring seat on the strut.
11. Inspect the strut assembly components for the following and replace as necessary:
-
Inspect the strut for any condition of shaft binding over the full stroke of the shaft.
-
Inspect the jounce bumper for cracks and signs of deterioration.
-
Check the upper mount for cracks and distortion and its retaining studs for any sign of damage.
-
Check the upper seat and bearing for cracks and distortion.
-
Check for binding of the seat and bearing pivot bearing.
-
Inspect the dust shield for rips and deterioration.
-
Inspect the upper and lower spring isolators for material deterioration.