Concorde V6-3.5L VIN V (2003)
![background image](/chrysler/concorde/v6-3.5l_vin_v/Page-1393002.png)
1. Install Solenoid/Pressure Switch Assembly and screen to the separator and transfer plates (Fig. 381).
2. Install and tighten retaining screws (Fig. 380) to 6 Nm (35 inch lbs.) torque.
3. Install valve body.
1. Install Solenoid/Pressure Switch Assembly and screen to the separator and transfer plates (Fig. 381).
2. Install and tighten retaining screws (Fig. 380) to 6 Nm (35 inch lbs.) torque.
3. Install valve body.