Crossfire V6-3.2L VIN L (2004)
1. Lower the convertible top.
2. Remove both A-pillar trim panels. Refer to Trim Panel.
3. Remove both sun visors.
4. Remove the dome lamp assembly.
5. Remove the lower windshield trim panel and disconnect the universal transmitter harness connector.
6. Remove the upper windshield trim panel.
7. Disconnect the latch retainer switch harness connector (5).
8. Remove the latch retainer bolts (4) and remove the shim (3) and retainer (2) from the windshield header (1).
INSTALLATION
INSTALLATION - REAR BOW LATCH
1. Install the rear bow latch to the tonneau cover. Tighten screws (2) to 8 N.m (71 in.lbs.).
2. Connect the hydraulic lines (1) to the rear bow latch.
3. Connect the rear bow latch harness connector (3).
4. Connect the negative battery cable.
INSTALLATION - TONNEAU COVER LATCH