Crossfire V6-3.2L VIN L (2004)
5. Install the brake pad wear indicator (2) onto the caliper. Tighten the bolt to 8 Nm (6 ft. lbs.).
6. Connect the brake wear indicator to the brake pad.
7. Install the caliper support spring (2) in the top end of the caliper and under the mounting bracket (1). Then install the other end into the lower
caliper hole (3). Hold the spring (2) into the caliper hole (3) with your thumb while prying the end of the spring (2) out and down under the
mounting bracket with a screwdriver.
