Crossfire V6-3.2L VIN L (2004)
Brake Hose/Line: Testing and Inspection
BRAKE HOSES AND LINES
A flexible rubber hose is used at both front brakes and rear brakes. Inspect the hoses whenever the brake system is serviced, at every engine oil
change, or whenever the vehicle is in for service.
Inspect the hoses for surface cracking, scuffing, or worn spots. Replace any brake hose immediately if the fabric casing of the hose is exposed due to
cracks or abrasions.
Also check brake hose installation. Faulty installation can result in kinked, twisted hoses, or contact with the wheels and tires or other chassis
components. All of these conditions can lead to scuffing, cracking and eventual failure.
The steel brake lines should be inspected periodically for evidence of corrosion, twists, kinks, leaks, or other damage. Heavily corroded lines will
eventually rust through causing leaks. In any case, corroded or damaged brake lines should be replaced.
Factory replacement brake lines and hoses are recommended to ensure proper quality and correct length. Care should be taken to make sure that brake
line and hose mating surfaces are clean and free from nicks and burrs. Also remember that right and left brake hoses are not interchangeable.
