Crossfire V6-3.2L VIN L (2004)
1. Make sure the engine is at 40 °ATDC.
2. Position the camshaft bearing bridge on the camshaft.
3. Using Special Tools 9104 (1) and 9105 Camshaft Locating Plates, lock the camshafts by placing the tool flush on the cylinder head, and inserting
it into the groove in the camshaft.
Camshaft Bearing Cap Torque Sequence
4. Install, but do not tighten the bearing bridge bolts.
5. Tighten the bolts in the sequence shown to 15 Nm (11 ft. lbs.).