Crossfire V6-3.2L VIN L (2004)
4. Using Special Tool 9106 (1) Valve Assembly Tool Case, remove the valve stem seal (2).
5. Remove the valve (4) from the cylinder head.
6. Inspect the valve face and the stem for any wear or nicks. Replace damaged valves as required.
CLEANING
1. Clean all valves thoroughly and discard burned, warped and cracked valves.
INSTALLATION
1. Install the valve into the cylinder head.
2. Install the protective sleeve (2) over valve stem.
3. Lubricate the valve stem seal before installing.
4. Using Special Tool 9106 (1) Valve Assembly Tool Case, press the valve stem seal (3) onto valve stem.
5. Remove the protective sleeve (2).
