Drive Belt: Specifications (page 5 of 5)
- Make
- Chrysler
- Model
- Crossfire
- Engine
- V6-3.2L VIN L
- Year
- 2004
- Section
- Drive Belt
MaintenanceSpecifications · page 5 of 5
1. Position the accessory drive belt on the pulleys.
1. Crankshaft
2. A/C Compressor
3. Power Steering Pump
4. Idler Pulley
5. Generator
6. Water Pump
7. Tensioner
2. Rotate the belt tensioner (1) clockwise and remove the 5 mm pin (2).
3. Allow the belt tensioner (1) to rest on the accessory drive
belt.
4. Release the belt tensioner and remove the wrench.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
The same page in: Crossfire V6-3.2L VIN L (2004).
Parts & tools for this job For 2004 Chrysler Crossfire 3.2L
- PARTOil filterSearch: Chrysler Crossfire 2004 3.2L oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Chrysler Crossfire engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.