Workshop Manuals Factory service & repair Chrysler
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Chrysler Crossfire V6-3.2L VIN L (2004)03 · Maintenance
03 · Maintenance

Brake Fluid: Specifications

Make
Chrysler
Model
Crossfire
Engine
V6-3.2L VIN L
Year
2004
Section
Fluids › Brake Fluid › Specifications
MaintenanceSpecifications · page 1 of 3
Brake Fluid: Specifications – Chrysler Crossfire V6-3.2L VIN L (2004)

Brake Fluid: Specifications

BRAKE FLUID 

CAUTION:  Never use reclaimed brake fluid or fluid from an container which has been left open. An open container of brake fluid will absorb
moisture from the air and contaminate the fluid. Never use any type of a petroleum-based fluid in the brake hydraulic system. Use of such type fluids
will result in seal damage of the vehicle brake hydraulic system causing a failure of the vehicle brake system. Petroleum based fluids would be items
such as engine oil, transmission fluid, power steering fluid, etc.

The brake fluid used in this vehicle must conform to DOT 4 specifications and SAE J1703 standards. No other type of brake fluid is recommended or
approved for usage in the vehicle brake system. Use only Mopar brake fluid or an equivalent from a tightly sealed container.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

The same page in: Crossfire V6-3.2L VIN L (2004).

Parts & tools for this job For 2004 Chrysler Crossfire 3.2L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.