Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Carpet: Service and Repair
CARPET
REMOVAL
REMOVAL - CARPET (LEFT SIDE)
1. Remove the front seat.
2. Remove the rear center console.
3. Remove the cover on center console.
4. Remove the ashtray housing with the stowage compartment in the front of the center console.
5. Remove the air outlet cover in the footwell.
6. Remove the door sill trim plate (4). Refer to Trim Panel.
7. Remove the kick panel (2) in the left footwell by pulling the edge guard (1) off in the area of the kick panel (2). Remove the cap (3) with a small
screwdriver, then remove the screw.
8. Remove the pedal cover.
9. Remove nut (1) attaching the accelerator pedal to the instrument panel structural duct.