Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Yaw Rate Sensor: Service and Repair
YAW RATE/LATERAL ACCELERATION SENSOR
REMOVAL
1. Remove the rear center console.
2. Disconnect the yaw rate/lateral acceleration sensor harness connector.
3. Remove the mounting nuts, and remove the yaw rate/lateral acceleration sensor (1).
INSTALLATION
1. Install the yaw rate/lateral acceleration sensor (1). Tighten the nuts to 10 Nm (89 inch lbs.).
2. Connect the yaw rate/lateral acceleration harness connector.
3. Install the rear center console.
