Crossfire SRT-6 V6-3.2L SC VIN N (2005)
1. Position the muffler section in rubber exhaust hangers (1).
2. Install the bolts in the left and right center exhaust flange. Tighten the bolts to 20 Nm (15 ft. lbs.).
3. Connect the ground strap (1) at the muffler and tail pipe. Tighten the ground strap bolt to 10 Nm (89 inch lbs.).
4. Remove the support.
5. Install the rear support bracket. (Convertible only)
6. Lower the vehicle.
