chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Brakes and Traction Control > < M/T Shifter - Loose/Inoperative|Page 3792
Page 6
background image

FIGURE 5

3.

Repeat Steps 1 and 2 until all white nylon end fittings identified in Figures 2-5 are clipped.

NOTE:

CLIPS ARE NOT REQUIRED IF THE END FITTINGS ARE COLOR CODED BLACK.

POLICY:

Reimbursable within the provisions of the warranty

TIME ALLOWANCE:
Labor Operation No.

21-35-30-90

0.3 Hrs.

FAILURE CODE:

37 - Excessive Wear

Brakes and Traction Control > < M/T Shifter - Loose/Inoperative|Page 3792