chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Powertrain Management > < Exhaust Flex Joint - Leakage/Noise
Page 1
background image

Exhaust Pipe: All Technical Service Bulletins
Exhaust Flex Joint - Chirp/Squeak

Models

1978 Through 1984 All Domestic Front Wheel Drive Vehicles Except 2.2L Turbo

Subject

Exhaust Flex Joint Squeaking and/or Exhaust Leakage

Index

EXHAUST

Date

April 16, 1984

No..

11-01-84

P-1528-C
This bulletin can be used as an information supplement to Technical Service Bulletin #11-02-83. It is foil wrapped not necessary to use the anti-seize
compound on the new stainless steel exhaust seal ring PN 4301350 described in this bulletin. TBS# 11-02-83 can be found in your SYS 3 by accessing
any 1983 Passenger vehicle w/2.2l and picking "Exhuast" catagory.

SYMPTOM/CONDITION

This bulletin describes the use of a new and improved exhaust seal ring to resolve two complaint conditions outlined below:

Condition 1

Exhaust flex joint (seal ring) "chirp" or "squeak".

Condition 2

Momentary exhaust leak during engine rotation under acceleration.

PARTS REQUIRED

1 - Exhaust Seal Ring

PN 4301350

Install new seal ring following the respective year service manual procedure.

POLICY:

Reimbursable within the provisions of the warranty

TIME ALLOWANCE:
Labor Operation No.

11-20-05-04................. 0.4 Hrs

FAILURE CODE:

68 - Noisy

Powertrain Management > < Exhaust Flex Joint - Leakage/Noise