Lebaron Convertible L4-153 2.5L SOHC VIN K TBI (1986)
C7 or HL
4402451
E7
4402459
"K" Body W/Power Bucket Seat
All
4402447
(except convertible models)
"E" Body W/Left Power 50/50 Front
FF, LF & LP
4402453
Split Bench Seat
"K" Body W/Left Power 50/50 Front
JP
4402453
Split Bench Seat (except convertible models)
All Models
Seat Adjuster Frame Reinforcement Bracket
4402925
Welding rod as described in the repair procedure.
REPAIR PROCEDURE
Remove the driver's seat and power seat adjuster assembly from the vehicle and transfer to a suitable work surface.
FIGURE 1A - VIEW IN DIRECTION OF ARROW Z (1986) 50/50 SEAT ONLY
When removing the 50/50 split bench seat, the in-board seat belt and wiring pigtail should be disconnected from the floor and removed with the seat and
power seat adjuster assembly (Figure 1A).
A.
Seat Cushion Spring Assembly Replacement
NOTE:
SEAT CUSHION FRAME ASSEMBLIES LESS TRIM HAVE BEEN MADE AVAILABLE FOR THIS SERVICE.
REPLACEMENT WILL REQUIRE TRANSFER OF EXISTING CUSHION TRIM TO THE NEW ASSEMBLY. TRANSFER
OF THE TRIM SHOULD BE HANDLED PER YOUR NORMAL TRIM REPAIR POLICY -- EITHER BY SUBLET, OR YOUR
OWN FACILITY -- FOLLOWING THE PROCEDURE BELOW:
1.
Remove the seat adjuster assembly from the seat cushion assembly.
NOTE:
VEHICLES WITH 50/50 SEAT - REMOVE THE IN-BOARD SEAT BELT ASSEMBLY FROM THE SEAT CUSHION
ASSEMBLY FROM THE TOP SIDE.