Lebaron Convertible L4-153 2.5L SOHC VIN K TBI (1986)
![background image](/chrysler/lebaron_convertible/l4-153_2.5l_sohc_vin_k_tbi/Page-62001.png)
Brake Switch (Cruise Control): Testing and Inspection
1. Disconnect connector at switch pigtail and connect suitable 12 volt source to either terminal.
2. Connect a test lamp from other terminal to ground. Test lamp should light when brake pedal is in normal position and should go off when brake
pedal is depressed to a maximum of approximately 3/8 - 1/2 inch after proper adjustment as outlined under "Brake Switch Adjustment" in
individual car chapters.