chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Symptom Related Diagnostic Procedures|Page 3689 > < Symptom Related Diagnostic Procedures|Page 3687
Page 4
background image

Test Lamp Between Terminals "L" And "P2"

4.

If voltage at "P2" is 0 or test lamp does not light, motor park switch is faulty and motor assembly must be replaced.

5.

If there is 12V or test lamp lights at terminal "P2," there is an open in the column switch or wiring.

Motor Keeps Running In Switch "Off" Position

Wiper Motor Wiring Connectors

NOTE: To gain access to wiper motor wiring terminals, remove terminal cover or suppressor as required.

Symptom Related Diagnostic Procedures|Page 3689 > < Symptom Related Diagnostic Procedures|Page 3687