chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

All Technical Service Bulletins for Control Module: > < A/T - A604 Excessive Upshifting/Downshifting
Page 2
background image

3.

Remove the controller.

4.

Install the new controller PN 4557585 and torque the mounting bolts to 17 inch pounds.

5.

Install the 60-way connector to the controller, torque the attachment bolt to 40 inch pounds.

6.

Reconnect the negative battery cable.

7.

Road test vehicle to verify controller function, check for fault codes and disconnect the DRB II.

POLICY:

Reimbursable within the provisions of the warranty.

TIME ALLOWANCE
Labor Operation No.

08-19-05-96                        

0.6 Hrs.

FAILURE CODE:

58 - Internal Defect

All Technical Service Bulletins for Control Module: > < A/T - A604 Excessive Upshifting/Downshifting