Lebaron Landau V6-181 2972cc 3.0L SOHC VIN 3 FI (1990)
Blend Air Door Crank Linkage
3. Using a common pair of pliers, place one plier jaw on top of pivot shaft and the other jaw under the crank arm linkage and pinch the crank arm off
of the pivot shaft.
4. Disconnect the vacuum lines from the defrost and panel mode vacuum actuators and position them out of the way.
5. Remove three heater-A/C unit cover attaching screws going upward at the defroster outlet chamber.
6. Remove two heater-A/C unit cover attaching screws going upward at the air inlet plenum.
Heater A/C Unit Cover