Lebaron Town & Country L4-153 2.5L SOHC VIN K TBI (1988)
Throttle Position Sensor: Service and Repair
Throttle Position Sensor (TSP) replacement
1. Disconnect battery ground cable, then remove air cleaner.
2. Disconnect three-way connector at throttle position sensor (TPS), then remove TPS to throttle body mounting screws.
3. Lift TPS from throttle shaft, then remove O-ring.
4. Reverse procedure to install. Install new O-ring and torque TPS to throttle body mounting screw to 20 inch lbs.