Lebaron Town & Country L4-153 2.5L SOHC VIN K TBI (1988)
Crimp and apply 60/40 rosin core solder or equivalent to grip area of terminal. See illustrations of proper crimps and solder applications.
Repairing Splices
Use same repair procedure called out in "Repairing Broken or Cut Wires", except the heat shrink tubing application is replaced by a minimum of three
wraps of electrical tape.
Recommended Hand Tools
AMP Inc. "Super Champ FT" tool No. 29564 (Terminal Crimper), Packard Electric tool No. 8913369 (Terminal Remover), Weller Model 8200 dual
heat 100/140 watts (Soldering Gun).
Airbag Module Disposal Procedures
Deployed Airbag Module
Any time you handle a deployed airbag you should wear gloves and eye protection. There will be deposits on and around the airbag that could cause skin
or eye irritation. If the material does come into contact with the body, flush with plenty of cold water.
The deployed airbag module should be placed in a plastic bag and disposed of in the same manner as any other scrap part.