chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Heater-A/C Control Replacement|Page 3249 > < Compressor Clutch|Testing and Inspection|Page 3244
Page 1
background image

Control Assembly: Service and Repair
Heater-A/C Control Replacement

1. Remove 2 bezel screws.
2. Remove bezel by rolling out & lifting to disengage locking feet.
3. Remove control mounting screws and slide control unit out.
4. Disconnect cables, vacuum hose and wiring. Remove control unit.
5. Reverse procedure to install. 

Heater-A/C Control Replacement|Page 3249 > < Compressor Clutch|Testing and Inspection|Page 3244