Lebaron Town & Country L4-156 2.6L SOHC VIN G 2-bbl (1984)
Fig. 9 Removing inner rack oil seal
15. Remove inner rack seal from rack housing and dispose using tool No. C-4665.
16. Remove and dispose of rack piston ring, inner rack seal, bulkhead seal and bulkhead O ring.
17. Mark breather tube to housing location and remove tube.
Fig. 10 Bulkhead oil seal installation
Fig. 11 Installing bulkhead assembly into rack tube
Fig. 12 Pinion shaft seal installation
ASSEMBLE
1. Align breather tube with previously made marks on housing, then install grommet so tabs lock.
2. Install new piston ring on rack, position seal protector No. C-4666 over rack teeth and slide seal with lip facing piston onto rack.
3. Remove seal protector and bottom the seal on rack piston, slide plastic retaining ring on rack onto seal. Slide rack, seal and piston ring into
housing, using caution not to rip or deform ring or seal. Tap rack with a rubber hammer to seat seal.