Lebaron Town & Country L4-156 2.6L SOHC VIN G 2-bbl (1984)
![background image](/chrysler/lebaron_town_&_country/l4-156_2.6l_sohc_vin_g_2-bbl/Page-622004.png)
5.
Attach the 7" long hose on the reservoir inlet to the fuel pump outlet nipple and clamp with hose clamp, PN 6500650 (Figure 1). Torque to 10 inch
pounds.
FIGURE 2 - SPEED SENSOR RELOCATION
6.
Vehicles equipped with a speed sensor on the right shock tower or right fender shield may have to have it relocated to allow room for pressure
regulator.
To relocate sensor, mark and drill 1/8" hole for upper sensor mount on right fender shield as shown in Figure 2. Re-attach sensor with upper screw.
Adjust the speed sensor to a 30~ angle as shown, center punch, and drill 1/8" hole for the second attaching screw. Install the second screw and
tighten both screws securely.