LHS V6-3.5L VIN G (1998)
Figure 51 Compressing Timing Belt Tensioner
4. Slowly pre-load the tensioner with a vise and install locking pin.
NOTE: Once pin is installed, the tensioner must be stored with the plunger facing upward until it is ready to be reinstalled.
Figure 52-Camshaft Sprocket Timing Marks
5. Install camshaft sprockets onto the camshafts. Install NEW sprocket attaching bolts into place. The 255 mm (10 inch) bolt is to be installed in the
left camshaft and the 213 mm (8 3/8 inch) bolt is to be installed into the right camshaft. Do not tighten the bolts. Camshaft sprocket mark should
be positioned between the marks OI1 the cover at both sprocket.
Figure 53-Timing Belt-Installation