New Yorker V6-201 3.3L VIN R FI (1992)
Trunk / Liftgate: Recalls
Campaign - Trunk Lid Moisture Drain Holes
NO. 535
February, 1992
To:
All Chrysler-Plymouth Dealers
Subject:
Customer Satisfaction Notification # 535 -- Trunk Lid Moisture Drain Holes
Models:
1992 Model Year Chrysler New Yorker Salon and Fifth Avenue (AC/AY-Body) Vehicles Built From Job # 1 Through Mid October, 1991
The trunk lid bottom hem flange on listed model vehicles may perforate due to corrosion because of missing drain holes. To prevent corrosion from
occurring, a drain hole must be drilled in the lower surface of the trunk lid inner panel on each side.
Important:
Some of the involved vehicles may still be in dealer stock. Be sure to complete the service on these vehicles before retail delivery.
Details of this service action are explained in the following sections.
Note:
No videotape of the service procedure for this recall will be provided.
Vehicle List
Each dealer to whom involved vehicles were invoiced (or the current dealer at the same location) will receive with this letter a vehicle list arranged in
Vehicle Identification Number (VIN) sequence. Owners known to Chrysler are also listed. The lists are for dealer reference in arranging for service of
involved vehicles.
Each Chrysler-Plymouth and Dodge dealer without a Vehicle List will receive an information copy of this letter by Compak Mail for use in performing
the service on any involved transient vehicles.
Parts
No parts are required for this service.
Owner Notification and Service Scheduling
All involved vehicle owners known to Chrysler are being notified of the service requirement by first class mail. They are requested to schedule
appointments for the service with their dealers at the earliest possible date. A copy of the owner notification letter is included.
Enclosed with each owner notification is an Owner Recall Notification Form. The involved vehicle and recall are identified on the form for owner or
dealer reference as needed.
Service Procedure