New Yorker V6-201 3.3L VIN R FI (1992)
![background image](/chrysler/new_yorker/v6-201_3.3l_vin_r_fi/Page-1504009.png)
25.
Loosen the dash mounting bracket from the hydraulic unit. Install the rubber dust boot over the actuator bore flange and seat the retaining ring into
the groove and re-tighten bracket.
26.
Install the hydraulic unit, with new mounting gasket, as outlined in the appropriate Service Manual.
27.
Ensure the brake system is functioning as designed.**
Time Allowance
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE: 58 - Internal Defect