New Yorker V6-201 3.3L VIN R FI (1992)
Fig. 30 Installing Crankcase Oil Seal
8.
Install crankshaft oil seal as follows:
a. Position seal into opening with seal spring towards inside of engine.
b. Install seal until flush with cover using seal crankshaft seal installing tool No. C-4992 or equivalent, Fig. 30.
Fig. 31 Installing Crankshaft Pulley
9.
Install crankshaft pulley using thrust bearing/washer plate tool No. L-4524 or equivalent and a 5.9 inch screw, Fig. 31. Torque crankshaft pulley
bolt to specifications.
Fig. 24 Engine Bracket
10.
Install engine bracket, Fig. 24 and torque attaching screws to 40 lb-ft.
11.
Install idler pulley on engine bracket.
12.
Install cam sensor.
13.
Install A/C compressor mounting bracket, then the A/C compressor.
