New Yorker V6-201 3.3L VIN R FI (1992)
PARTS REQUIRED:
REPAIR PROCEDURE:
This repair involves the replacement of the Powertrain Control Module with a module that has revised software.
1.
With the ignition switch in the OFF position, disconnect the battery.
2.
Remove the PCM as outlined in the appropriate service manual, and replace it with a unit called out in PARTS REQUIRED.
3.
Connect the battery.
4.
Type the required information on the Authorized Modification Label, as illustrated, and attach near the VECI Label.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No.
08-19-92-99 Replace PCM - 1992 Fed
0.4 Hrs.
08-19-40-91 Reprogram PCM - 1992 CA/1993 All
0.3 Hrs.
FAILURE CODE:
FM - Reprogram Module - 1992 CA/1993 All
AM - Authorized Modification - 1992 Fed.