New Yorker V6-201 3.3L VIN R FI (1992)
4.
Using special tool C-4553, remove the 2 screws attaching the transaxle oil filter. Separate the transaxle oil filter and gasket from the valve body
and discard (refer to Figure 1).
5.
Remove the parking rod E-clip and disconnect the parking rod from the valve body (refer to Figure 2).
6.
Remove the neutral start/back-up lamp switch (refer to Figure 3).
7.
Remove the seven valve body attaching bolts and separate the valve body and governor tubes from the transaxle.