Pacifica V6-3.8L (2008)
1. Lubricate with engine oil and install the crankshaft main bearing halves in the engine block.
2. Position the crankshaft in engine block (11).
3. Perform main bearing fitting procedure See: Crankshaft Main Bearing/Service and Repair/Procedures.
4. Inspect main cap bolts for stretching. Replace bolts that are stretched.
NOTE: The main cap bolts should be examined before reuse. Bolt stretch can be checked by holding a scale or straight edge against the
threads (2). If all the threads do not contact the scale (2) the bolt must be replaced.