Pacifica V6-3.8L (2008)
Front Crankshaft Seal: Service and Repair
Installation
INSTALLATION
1. Position Special Tool C-4992-2 Guide (3), on the crankshaft nose.
2. Position new seal over the guide with the seal spring in the direction of the engine front cover.
3. Install seal using Special Tool C-4992-1 (1) until seal is flush with cover.
4. Install crankshaft damper. See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley/Service and Repair/Vibration Damper -
Installation
5. Install accessory drive belt. See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal and
Replacement/Accessory Drive Belt - Installation
6. Install inner splash shield and right front wheel.
7. Lower vehicle and connect negative cable to battery.