Pacifica V6-3.8L (2008)
Blower Motor Relay: Service and Repair
Installation
INSTALLATION
NOTE: Refer to the fuse and relay layout map on the inside of the cover of the integrated power module (IPM) for front blower motor relay
location.
1. Position the front blower motor relay to the receptacle in the IPM (2) located near the battery (3) in the engine compartment.
2. Align the front blower motor relay terminals with the terminal cavities in the IPM receptacle and push down firmly on the relay until the terminals
are fully seated.
3. Install the cover (1) onto the IPM.
4. Reconnect the negative battery cable.