Pacifica V6-3.8L (2008)
Keyless Entry Module: Service and Repair
Sentry Key Remote Entry Module - Removal
REMOVAL
1. Open hood, disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component
service. Failure to do so may result in accidental airbag deployment, personal injury or death.
2. Remove knee blocker airbag See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Knee Blocker Airbag - Removal.
3. Unsnap instrument panel center stack left bezel (13) from instrument panel assembly (12).
4. Reach up behind the left side of the center stack and disconnect the ignition switch and SKREEM electrical connectors (5 and 6).