Pacifica V6-3.8L (2008)
Front Door Window Glass: Service and Repair
Front Door Glass - Removal
REMOVAL
1. Remove door trim panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim
Panel - Removal.
2. Remove watershield. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door
Watershield/Removal.
3. Remove inner belt molding.
4. Position glass to gain access to front and rear regulator lift plates through access hole in door panel.
5. Loosen the glass clamp nuts.
6. Remove glass from regulator glass brackets.
7. Disengage glass from glass run weatherstrip.
8. Insert front of glass between glass run channel and outer door panel.
9. Lift glass upward and out of exterior side of the opening at top of door.
10. Remove glass from vehicle.