Pacifica V6-3.8L (2008)
9. Remove fixed glass run channel from door.
10. Remove quarter glass from fixed glass run channel.
Installation
INSTALLATION
1. Position quarter glass into the fixed glass run channel.
2. Place fixed glass run channel into position in door.
3. Install screw attaching glass run to door panel.
4. Insert glass run into window frame channel.
5. Install inner belt weatherstrip.
6. Install outer belt molding.
7. Install outer belt molding attaching screws.
8. Install watershield. See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door
Watershield/Installation.
9. Install door trim panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door Trim
Panel - Installation.
10. Raise door window glass.
