Pacifica V6-3.8L VIN L (2005)
-
Automatic headlamps (with electrochromatic mirror).
-
Illuminated entry.
-
A fade to off feature. - This feature dims the interior lighting (courtesy lamps) gradually if the BCM does not receive any new input that would
cause the interior lamps to remain on.
-
Pulse Width Modulated (PWM) instrument panel dimming.
-
Power liftgate switch input. - The BCM has 1 Liftgate switch input located in the overhead console.
-
All stalk switch inputs including wipers and light switches.
-
Seat belt position input, indicating a buckled or unbuckled seat belt.
-
Turn signal operation.
-
Fuel Level inputs.
-
Monitors rear-door ajar switches, liftgate ajar switches, multi-function switches, multi-function headlight switch, ignition switch, PCI Bus, and
diagnostic tool. Based on input from these components, the BCM will send requests over the PCI Bus to have the Instrument Cluster perform
various chime operations.
The BCM has internal diagnostic capabilities that assist in diagnosing the vehicle's body system. When an "Open" or a "Short" circuit exists, the
DRBIII(R) scan tool can read the stored BCM Diagnostic Trouble Codes (DTC's). The DTC's are very descriptive in identifying the appropriate feature
that has faulted.