Pacifica V6-3.8L VIN L (2005)
3.
Remove the door tweeter speaker. Refer to the service information in TechCONNECT. Refer to 8 - Electrical > Audio > Speaker > Removal (Fig
1).
4.
Remove the power seat switch. Refer to the service information in TechCONNECT. Refer to 8 - Electrical > Power Seats > right Seat Switch >
Removal.
5.
Replace the right door interior handle, p/n 05170261AA, as described on Mopar Instruction Sheet K6855628 included in the handle kit.
6.
Install the power seat switch.
7.
Install the door tweeter speaker.
8.
Install the right door trim panel.
9.
Connect the negative battery cable.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
Technical Service Bulletin # 08-021-08
Date:
080524
Electrical - Right Front Door Switches Inoperative
NUMBER: 08-021-08
GROUP: Electrical
DATE: May 24, 2008