Pacifica V6-3.8L VIN L (2005)
Front Door Hinge: Service and Repair
HINGE
REMOVAL
NOTE: It is not necessary to remove the door to replace the hinges if they are replace one at a time.
1. Release front door latch and open door.
2. Remove check strap from A-pillar.
Fig. 15
3. Mark hinge foot print on both door and pillar to aid when installing door (Fig. 15).
4. Support door on suitable lifting device.
5. Remove bolts attaching hinge to A-pillar.
6. Remove bolts attaching front door to door hinge.
7. Remove door hinge from vehicle.
INSTALLATION
NOTE: It is not necessary to remove the door to replace the hinges if they are replace one at a time.