Pacifica V6-3.8L VIN L (2005)
Rear Door Weatherstrip: Service and Repair
Door Opening Seal - Inner
DOOR OPENING SEAL - INNER
REMOVAL
1. Open door.
Fig. 2
2. Using a trim stick C-4755 or equivalent, disengage the push pins attaching door trim inner seal to door sill (Fig. 2).
3. Remove door trim inner seal from vehicle.
INSTALLATION
1. Place door trim inner seal into position.
2. Press on door inner seal and push pins to engage into door sill (Fig. 2).
3. Close door.