Pacifica V6-3.8L VIN L (2005)
Replaceable components of the power liftgate drive unit assembly are the complete unit, motor alone, optical sensor, full-open switch, link rod, channel/
brackets/clutch/rack and shoes/yoke assembly. Refer to additional information for more component details.
The drive unit and components cannot be adjusted or repaired and if damaged they must be replaced. Consult your Mopar(TM) parts catalog for a
specific part number.
LIFTGATE IS CLOSED
Depressing either of the power liftgate open/close command switches, sends a PCI data bus signal to the power liftgate control module. The control
module will then signal the door mounted latch assembly to release the door from its primary closed and latched position to the ajar and movable
position. The lift-gate motor then takes over to move the liftgate into the full open position.
LIFTGATE IS OPEN
Depressing either of the power liftgate open/close command switches, sends a PCI data bus signal to the power liftgate control module. The control
module will then signal the liftgate motor to move the lift-gate into the closed position. Once the door mounted latch reaches the body mounted striker
assembly, the power latch takes over to cinch the door to the fully closed and latched position.
If a obstacle is encountered during a power open or close cycle, the power liftgate control module will automatically reverse direction of the liftgate to
prevent vehicle damage or personal injury.