Pacifica V6-3.8L VIN L (2005)
![background image](/chrysler/pacifica/v6-3.8l_vin_l/Page-2112001.png)
Upper Side Moulding / Trim: All Technical Service Bulletins
Body - Upper Applique Loose Above Left Front Door
NUMBER: 23-015-07
GROUP: Body
DATE: May 11, 2007
SUBJECT:
Upper Applique Loose Above Left Front Door
OVERVIEW:
This bulletin involves body rework and installing a replacement upper applique.
MODELS:
2004 - 2007
CS
Pacifica
SYMPTOM/CONDITION:
The vehicle operator may notice a gap or separation between the front of the left upper applique and the body. During the manufacturing process, some
vehicles had the sheet metal at the front retainer clip cavity raised or dimpled up. This caused the applique to raise from roof line.
DIAGNOSIS:
If the Symptom/Condition is present, perform the Repair Procedure.
PARTS REQUIRED:
SPECIAL TOOLS/EQUIPMENT REQUIRED:
REPAIR PROCEDURE:
1.
If the vehicle is equipped with a luggage rack, move the rails to the full rearward position.
2.
Remove the first (3) 1-25 torx screws on the forward end of the left side luggage rack rail. Lift left side rail enough to allow left applique to clear
luggage rack rail.
3.
Lift up on the rear inboard side of the upper applique releasing the attaching clips. Continue releasing all clips working towards the front of the
vehicle.
4.
Remove the front retainer clip.