Pacifica V6-3.8L VIN L (2005)
GROUP: Body
DATE: August 1, 2006
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 23-045-04, DATED NOVEMBER 10, 2004, WHICH SHOULD BE
REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDES AN ADDITIONAL YEAR.
SUBJECT:
Front Or Rear Splash Shield to Body Rattle Sound
OVERVIEW:
This bulletin involves adding a piece of foam tape between the front fender or rear quarter panel and the inner splash shield.
MODELS:
2004 - **2006**
(CS) Pacifica
SYMPTOM/CONDITION:
Vehicle may exhibit a rattle sound, from the front or rear of the vehicle, while driving 70 kpm (45 mph) to 115 kpm (70 mph) in ambient temperatures
above 29.5° C (85° F). The sound may be intermittent.
DIAGNOSIS:
If vehicle operator describes the Symptom/Condition coming from the front of the vehicle, perform the Front Repair Procedure.
If vehicle operator describes the Symptom/Condition coming from the rear of the vehicle, perform the Rear Repair Procedure.
PARTS REQUIRED:
FRONT REPAIR PROCEDURE:
1.
Turn steering wheel all the way to the left.
2.
Using the foam tape, p/n 04318028, cut one piece to a length of 152 mm (6.0 in.) and one piece to a length of 304 mm (12.0 in.). Then cut each
piece in half lengthwise. This will make four usable pieces for the front of the vehicle (one piece of each length will be used in each front wheel
house opening).