Pacifica V6-3.8L VIN L (2005)
Sunroof / Moonroof Motor: Procedures
CAUTION: THERE IS NO ADJUSTMENT AVAILABLE FOR A NORMALLY OPERATING SUNROOF. THIS PROCEDURE IS USED TO SET
SUNROOF MOTOR/ MODULE TO SUNROOF ASSEMBLY TIMING.
Sunroof Guide Lock Position
1. Manually push the sunroof guide assembly to the full forward position until it is locked into position. This is verified by attempting to push the
guide assembly rearward.
NOTE: The guide rail will be raised above the U-frame assembly when in the lock position.
2. Remove the sunroof glass.