Pacifica V6-3.8L VIN L (2005)
module de-energizes the solid-state relay. The module will continue to cycle the solid-state relay as needed to maintain the temperature set point.
The heated seat system will automatically turn off whenever the ignition switch is turned to any position except On. If the ignition switch is turned to the
Off position while a heated seat is ON, the heated seat will remain Off after the engine is restarted until a 2nd row seat heated seat switch is depressed
again. This prevents the vehicles battery from being drained by the heated seat system.
The 2nd row heated seat module also controls the heated seat LED indicator lamps, located in both of the 2nd row heated seat switches. The module is
programmed to provide self-diagnostics, if a problem with the 2nd row heated seat system is detected. If the module detects faults within the heated seat
system, it will provide a visual indication of the failure by flashing the indicator lamps in the appropriate heated seat switch.
The module will automatically turn off the heating elements if it detects an OPEN or HI/LOW short in the sensor circuit, or an OPEN or LOW short in
the heating element circuit. See the owner's manual in the vehicle glove box for more information on the features, use and operation of the front seat
heated seat system.