Pacifica V6-3.8L VIN L (2005)
Heating Element Installation
1. Peel off the adhesive backing on the back of the replacement heating element and stick directly on top of the factory installed heating element.
CAUTION: During the installation of the replacement heating element, be careful not to fold or crease the element assembly. Folds or creases
will cause premature failure.
Heated Seat Wire Harness Routing
2. Connect the new heating element electrical connectors. Passenger seat shown, driver seat similar.
3. Connect the battery negative cable.
4. Verify heated seat system operation.
5. Install the appropriate seat cushion or seat back trim cover.