Pacifica V6-3.8L VIN L (2005)
![background image](/chrysler/pacifica/v6-3.8l_vin_l/Page-2325001.png)
Seat Heater Switch: Service and Repair
Heated Seat Switches - 2ND Row Seats
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the rear floor console.
Rear Floor Console Switch Bezel
3. Remove the rear floor console switch bezel by releasing the retaining tab located at each end of the switch bezel and pushing it out through the
front surface of the console.
Removing 2nd Row Heated Seat Switches
4. Disconnect the heated seat switch wire harness connector and from the back of the rear floor console switch bezel, gently pry the switch free from
the bezel.