Pacifica V6-3.8L VIN L (2005)
Power Mirror Switch: Description and Operation
Both the right and left power outside mirrors are controlled by a single multi-function switch unit located on the driver side front door trim panel. The
power mirror switch unit includes a three-position rocker selector switch and one momentary multi-directional platform rocker switch.
The power mirror switch is integral to the Driver Door Module (DDM). The power mirror switch cannot be repaired or adjusted and, if inoperative or
damaged, the entire DDM unit must be replaced.
The power mirror selector switch is moved right (right mirror control), left (left mirror control), or center to turn the power outside mirror system off.
When the selector switch is in the right mirror control or left mirror control position, the platform rocker switch will activate the mirror in the up , down,
left or right positions based on the corresponding actuation. When the selector switch is in the Off position, depressing any of the directional switches
will not change either mirror position. This feature protects against any inadvertent mirror actuation.