Front Heated Seat Switch - Service and Repair
INSTALLATION
1. Install the rear heated switches into the back of the rear floor console switch bezel as required. Make sure that the switch retaining tabs are fully
engaged to the bezel.
2. Connect the wire harness connectors to the rear heated seat switches.
3. Install the rear floor console switch bezel into the rear floor console by pushing it in through the front surface of the console. Make sure that the
bezel retaining tabs are fully engaged to the console.
4. Install the rear floor console.
5. Reconnect the negative battery cable.
6. Verify 2nd row heated seat system operation.